Activities and Conferences of ExpoVivienda Foresto Industria 2023

Activities and Conferences of ExpoVivienda Foresto Industria 2023

Training Seminar and Technical Information

Friday, July 7 - "Room C" Concordia Convention Center

15:30 pm Presentation of the Concordia CAT N° 3217 Construction System within the framework of the Federal Productive Network Co-Construir Hábitat - Association of Carpenters of Concordia CIECS - CONICET and UNC. Dr. Paula Peyloubet Principal Investigator of CIECS-CONICET-UNC

 16:00 hs "Light framework system, the system with the greatest worldwide diffusion" the work of INTA/FUNDEFI INTA Dr. Forestry Engineer Martin Sánchez Acosta., Engineer Ftal. Matías Martínez, Ing. Ftal. Cyrus Mastrandrea

 4:30 p.m. Wood Construction Technical Roundtable National Forest Industrial Directorate Secretary of Agriculture, Livestock and Fisheries of the Nation

 6:30p.m Industrial Forestry Work Table Province of Entre Ríos

 8:30 p.m. Official opening.

Saturday July 8 - Technical Visits
11:00 a.m. Visit to the Housing Components Production Plant, Showroom (model house) and Solar Dryer for Wood Technical Presentation - Av. Rucci esq. Av. Unión – Concordia - Concordia Carpenters Civil Association

12:30 p.m. Visit to the Foundation for Industrial Forestry Development (FunDeFI), Ruta 22 s/n ex Fertimax sheds.

1:00 p.m. Visit to INTA Canadian House, built in 2007 and SUM INTA Concordia project. Agricultural Experimental Station (EEA) INTA Route 22 Yuquerí Station

Technical Training Conferences

Saturday, July 8 - "Room C" Concordia Convention Center
3:30 p.m. "The importance of impregnation treatments for exterior wood" the case of "Mirador Gualeguaychú" - Arch. Graciela Inés Zanatelli and Arch. Marta Stolkisner

4:00 p.m. “Why certify FSC®?” FSC Argentina. - Executive Director Lic. Esteban Carabelli.

4:30 p.m. "How to Build in Wood" Light framework system. INTA Dr. Forestry Engineer Martin Sánchez Acosta. Ing. Phtal Ciro Mastrandrea, Ing. Phtal. Matias Martinez,

05:00 p.m. Break

5:30 p.m. “Introduction to the SIP Construction System, Installation training and technical aspects Sip Crette – Mr. Marcelo Wagner

6:00 p.m "Pneumatic nailers in construction, use and maintenance". Support for construction with wood - Dorking Nails and Staples - Mr Pablo Moscardi.

6:30 p.m. Break

7:00 p.m. "Sip-Tao Construction System. Structural. Thermal and Fast. Local Experiences" - Tao SIP Panels - Architect Francisco Puskovic – Mr. Lázaro Marucco

7:30 p.m. “Introduction to the Sip Propanel Construction System and the importance of wood in the Construction System – Propanel - Arch. Luciano Torres

Entre Ríos, Argentina, on July 7 and 8, 2023, from 2:00 p.m. to 10:00 p.m. at the Concordia Convention Center and has the collaboration of the National Secretariat of Agriculture, Livestock and Fisheries, and is organized by the government of Entre Ríos, with the coordination of the Ministry of Industry and Commerce, the Municipality of Concordia and with the support of the Federal Investment Council.

Coordinación y Planificación General - Bahr . Medina Navarro Arquitectos

WEMHONER Surface Technologies

IT MAY INTEREST YOU

Card image cap Since 2,000 were not enough, he planted 130,000 trees: he challenged the desert and turned it into an oasis

Its story is a testament to the human capacity to transform the environment through conscious action and respect for nature.

Read news »

Card image cap Conicet launches a portal to build houses with less environmental impact

Casa Conicet is the new platform that brings together scientific developments in construction, energy and bioclimatic design, with solutions designed for more sustainable homes throughout the country.

Read news »

Card image cap Real and virtual commissioning: Hymmen leverages digital twins to improve project management efficiency.

Bielefeld, 1/22/25 – The ideal scenario is one in which a production plant functions perfectly even before commissioning. However, a more detailed analysis of plant projects often reveals a different reality: unexpected challenges often arise during on-site commissioning that must be resolved with considerable deadlines. Hymmen demonstrates how digital twins can offer a solution. By simulating the production process in advance on a 1:1 scale and taking into account all relevant variables, this technology allows timely intervention at critical points.

Read news »

PRODUCTOS MIRO SRL

PERFILESLED

ALCE HERRAJES SH

HERRAJES MANDILE

GRUPO EURO

RAIES MADERAS S.A.

KCD SOFTWARE

FARAM SRL

AFIPAR SH

CORCHOLINEA

PIERMATTEI S.A.

PERIN Spa

ASERRADERO JARDIN S.R.L.

DIEGO LAVISTA LLANOS

USNR

INGLAMIAUX

THERMWOOD

CONTROL LOGIC

WEMHONER Surface Technologies

ASERSUR MADERAS

MADER-EXPO

ENCHAPADORA SAN JUAN