VETAS

Latest editions and resources

News

They planted 97,000 trees in Colombia, but the plan to protect them also included more than 190 bee hives

Recovering the forests that help supply Bogotá with water required more than reforestation. A project combined nature and rural production so that its results could last. Planting thousands of trees can transform a landscape, but it does not guarantee that this change will survive the test of time. In the mountains of Cundinamarca, Colombia, the recovery of degraded areas posed an additional challenge: protecting nature without leaving aside the families who depended on those lands.

Professional update | CPIA and INTA will present new willow cultivars developed through genetic improvement

The genetic improvement of willow and new technological alternatives for its use in different productive and environmental systems will be the focus of a professional update talk organized by the Professional Council of Agricultural Engineering (CPIA) and the National Institute of Agricultural Technology (INTA). The activity will take place on Wednesday, November 25, 2026, at 2:30 p.m., in virtual mode and with free participation, upon registration.

The Sorrento workshop that turned wood into art

Creators in 1920, the Biagio Barile workshop imposed a technique that is today famous throughout the world and that the family of founders continues to defend, piece by piece, as a legacy

Featured Products

Producto
HERRAJES MANDILE

Producto

View product
Color sampler
HUGO DANIEL VALETTO

Color sampler

View product
<b> Drum chipper - DPF </b><br>
DEMUTH DPF Drum Chippers are extremely simple machines with updated constructive characteristics, which to considerably increase efficiency and durability. The machines were projected after observing and using several equipament in operation. Considering that drum chippers are equipment initially used in countries of essentially tropical woods, they were properly projected and the experience proved to be machines of very long durability, high versatility and low maintenance
INGLAMIAUX

<b> Drum chipper - DPF </b><br> DEMUTH DPF Drum Chippers are extremely simple machines with updated constructive characteristics, which to considerably increase efficiency and durability. The machines were projected after observing and using several equipament in operation. Considering that drum chippers are equipment initially used in countries of essentially tropical woods, they were properly projected and the experience proved to be machines of very long durability, high versatility and low maintenance

View product
Producto
PERIN Spa

Producto

View product
Producto
VIALRO

Producto

View product
Ultra-flexible system concepts.
Our customers’ needs are extremely diverse. Just like the system concepts of our door and lightweight panel lines. Nevertheless, all Wemhöner systems have three characteristics in common: Developed in dialogue with our customers. Manufactured in accordance with highest German quality standards. Extreme efficiency in day-to-day production processes. 
In the field of lightweight panel production we offer various different manufacturing concepts. Design requirements for lightweight panels such as frames and inserts for fasteners are technically executed as highly efficient systems based on BOS, BOF and frameless design.
The individual components can be easily integrated into existing production lines, or built as a complete production line.
Lightweight panel systems are continuously fed and produce elements in a range of 16-120mm thickness.
Wemhöner systems offer the most advanced technology for the production of lightweight components in a through feed process.
WEMHONER Surface Technologies

Ultra-flexible system concepts. Our customers’ needs are extremely diverse. Just like the system concepts of our door and lightweight panel lines. Nevertheless, all Wemhöner systems have three characteristics in common: Developed in dialogue with our customers. Manufactured in accordance with highest German quality standards. Extreme efficiency in day-to-day production processes. In the field of lightweight panel production we offer various different manufacturing concepts. Design requirements for lightweight panels such as frames and inserts for fasteners are technically executed as highly efficient systems based on BOS, BOF and frameless design. The individual components can be easily integrated into existing production lines, or built as a complete production line. Lightweight panel systems are continuously fed and produce elements in a range of 16-120mm thickness. Wemhöner systems offer the most advanced technology for the production of lightweight components in a through feed process.

View product
Producto
EL EMPORIO DEL TERCIADO SA

Producto

View product
PRESSES
CHIATELLINO & CIA. SRL.

PRESSES

View product
Producto
F.D.M.

Producto

View product
CS 922 Y ACT CEBOLUTION
KLINGSPOR SRL

CS 922 Y ACT CEBOLUTION

View product
<b>Liquid Coating and Direct Printing – Lacquer</b><br>
Lacquer application machines, compact lines, rolling and spraying technology, drying technology. Application areas, such as furniture, doors, wooden flooring, wood-based boards, mouldings and profiles
HYMMEN

<b>Liquid Coating and Direct Printing – Lacquer</b><br> Lacquer application machines, compact lines, rolling and spraying technology, drying technology. Application areas, such as furniture, doors, wooden flooring, wood-based boards, mouldings and profiles

View product
Roble Vintage
ENCHAPADORA SAN JUAN

Roble Vintage

View product
Producto
KCD SOFTWARE

Producto

View product
Producto
MADERWIL S.A.

Producto

View product
Producto
ASERSUR MADERAS

Producto

View product
Producto
COMBILIFT

Producto

View product
Producto
JACKSON LUMBER HARVESTER CO., Inc.

Producto

View product
VETAS N523
GRUPO CALCAGNO

VETAS N523

View product
Incisors
FRUND STARK SA

Incisors

View product
VETAS N523
BIASSONI E HIJOS SAICA

VETAS N523

View product
Producto
GRUPO EURO

Producto

View product
Producto
INERPLAC

Producto

View product
PLYWOOD
DIEGO LAVISTA LLANOS

PLYWOOD

View product
Producto
COBUCO SRL

Producto

View product
RIPPER
PRECOR SA

RIPPER

View product
VETAS N512
HERRAJES RIMAC

VETAS N512

View product
Producto
DIFRA CNC

Producto

View product
Modelo europeo
FARAM SRL

Modelo europeo

View product
Producto
FORESTAL LAS MARÍAS SA

Producto

View product
Producto
ASERRADERO EUZKADI

Producto

View product

ISRAELIS DEVELOP AN INK TO PRINT WOOD IN 3D

Plus Communities By Ana Grinstein Israeli scientists are working on a technology that allows natural components of wood to be used to manufacture objects using three-dimensional (3D) printing.

Fairs and Exhibitions

FIMMA - MADERALIA
España — November 10 – 13, 2026
VETECO
Espana — November 10 – 13, 2026
FIMMA MADERALIA 2026
Espana — November 10 – 13, 2026
AGRO FORESTAL GANADERA
Argentina — November 12 – 15, 2026
View more fairs

Neuquén: Patagonia International Congress, beyond Fire: Neuquén, Río Negro and Chubut to establish an Interprovincial Regional Table

The first International Congress “Patagonia, beyond fire”, held from October 27 to 29 on the premises of the Rural Society of Neuquén and organized by the Secretary of Emergencies and Irrigation Management of the provincial government, closed with a commitment between Neuquén, Río Negro and Chubut to form an Interprovincial Regional Table for the prevention and comprehensive management of rural, forest and interface fires in the Patagonian provinces. The meeting, organized by the Government of Neuquén, brought together more than 400 participants and specialists from Argentina, Chile, Canada and Spain, with the purpose of transforming the exchange of experiences into a cooperation agenda in the face of new fire scenarios in the region.

France wanted to plant 1 billion trees by 2032, but Justice said no

A court decision halts Frances plan to renew 1 billion trees, exposing controversies over intervention in forests threatened by parasites and severe drought. In France, the ambitious plan to renew 1 billion trees by 2032 suffered a strong judicial setback. The objective, after the large fires of 2022, seeks to renew about 10% of French forests in the face of the advance of climate change.

Videos

About us

Since 1980, the leading media outlet for the forestry, wood and furniture industry across the Americas.

Learn more

Contact

Have a question or want to partner with VETAS? Get in touch.

Get in touch

Receive VETAS in your inbox

The leading magazine for the wood and furniture industry in Latin America, now in digital format.

  • Complete digital editions
  • Technical articles and industry trends
  • Coverage of international fairs and events
  • Exclusive content for subscribers
  • News straight to your inbox

Subscribe for free

Advertise with us

Connect your brand with professionals and decision-makers in the wood and furniture industry across Latin America.

  • Specialized industry audience
  • Regional reach across Latin America
  • Print, digital and editorial formats
  • Coverage of key fairs and events

Tell us what you’re interested in

Where would you like to advertise?